The Allen-Bradley 1734-OE2V is a POINT I/O Analog Output Module. It has 2 single-ended, non-isolated, voltage output with range of 0-10VDC or +/- 10VDC. It has an integrated analog to Digital converter circuitry with conversion resolution of 14 Bits and absolute accuracy of 0.1% full scale @ 25 °C.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN002 |
| User Manual | 1734-UM001 |
The Allen-Bradley 1734-IE8C is a POINT I/O Analog Input Module. It has Four (2) single-ended, non-isolated, Current input module with Delta Sigma Conversion Type with a Power Dissipation of 0.75 Watts at 28.8 Volts DC. This Analog Input Module has an Open Enclosure Type Rating and compatible with any POINT IO communication adapter.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN032 |
| User Manual | 1734-UM016 |
The 1734-IE2C is an analog input module that is part of Allen-Bradley’s POINT IO product family. This module features Two (2) single-ended, non-isolated Current input channels. Each channel is configurable for 0-20 mA and 4-20 mA output signals with 16 bits resolution – over 0…21 mA 0.32 μA/cnt. It is compatible with any POINT IO communication adapter, typically used for implementing distributed I/O architecture. This module requires 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS wiring base assemblies.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN027 |
| User Manual | 1734-UM001 |
The Allen-Bradley 1734-FPD is a POINT I/O Field Power Distributor. It has 12/24 Volts DC or 120/240 Volts AC Power Supply Input and a Field Power Supply Current of 10 amps with an Isolation Voltage of 250 Volts Continuous.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN059 |
| User Manual | 1734-UM016 |
The Allen-Bradley 1734-EP24DC is a Point I/O expansion power supply. This module supports installation Four (4) to Seventeen (17) modules. It has an input voltage rating of 24VDC nominal with voltage range of 10-28.8VDC. This module provides POINTBus output Current of 1 A @ 10-19.2V input and 1.3 A @ 19.2-28.8V input for horizontal mounting and 1 A @ 10-28.8V input for vertical mounting.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN058 |
| User Manual | 1734-UM016 |
The 1734-IR2 is a Resistance Temperature Detector (RTD)input module that is part of Allen-Bradley’s POINT IO product family. This module features Two (2) single-ended, non-isolated input channels. Each channel supports 100 Pt α = 0.00385; 200 Pt α = 0.00385; 100 Pt α = 0.003916; 200 Pt α = 0.003916; 10 Cu α = 0.00427; 100 Ni α = 0.00618; 120 Ni α = 0.00618 and 120 Ni α = 0.00672 sensors. Aside from RTD sensor inputs, this module also supports direct wiring of 0-600 Ω analog signal. This module has a 16-bit resolution.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN011 |
| User Manual | 1734-UM004 |
The Allen-Bradley 1734-IT2I is a POINT I/O Analog Temperature Input Module. It has 2 Thermocouple Inputs and a Resolution of 15 bits with an Input Voltage of 75 mV.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN011 |
| User Manual | 1734-UM004 |
The Allen-Bradley 1734-IE8C is a POINT I/O Analog Input Module. It has Eight (8) single-ended, non-isolated, Current input module, capable of receiving 0-20 mA or 4-20mA signals. This Analog Input Module has an Open Enclosure Type Rating.
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN033 |
| User Manual | 1734-UM016 |
| Selection Guide | 1734-SG001 |
The Allen-Bradley 1734-OE4C is a POINT I/O Analog Output Module. It has Four (4) single-ended, non-isolated, Current output module with Current range of 4 to 20 mA or 0 to 20 mA. It has an integrated Digital to Analog converter with conversion resolution of 16 Bits and absolute accuracy of 0.4% (0.1% if calibrated).
| RESOURCE | PUBLICATION NUMBER |
|---|---|
| Installation Instructions | 1734-IN034 |
| User Manual | 1734-UM016 |
| Selection Guide | 1734-SG001 |
The 1734-OW4 is an Allen-Bradley POINT IO module. This module is a Relay output module featuring Four (4) Normally Open (N.O.) SPST Relay contact outputs. The contact outputs are rated 5-30 VDC; 120 VAC and 250 VAC. This module has a POINTBus current draw of 90 mA @ 5DVC. It requires use of 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS terminal base for mounting and wiring the module.
| Installation Instructions | 1734-IN055 |
| User Manual | 1734-UM001 |